Home > Products > Abrasive
Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
  • Steel Cut Wire Shot
Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot Steel Cut Wire Shot

Steel Cut Wire Shot

Product Features:

    Steel cut wire shot size: 1.0mm 1.5mm 2.0mm 2.5mm 

Steel cut wire shot: 1.0mm  1.5mm 2.0mm 2.5mm



Package :


25kg per bag ,40 bags in one pallet


25kg per bag ,40 bags in one jumbo bag


25kg per paper bag ,40 bags in one plywood pallet


One ton a bulk bags


According to customer requirements



Application Devices:


Steel shot mainly used for the following equipment including shot blasting machine, sand blasting machine, sand blasting pot,etc.


How to choose an abrasive:


The first question to ask is whether you are working inside of a cabinet where the product can be contained and reused, or, are you out in the open where you are unable to continually reuse it?  If you are in a cabinet, then you should choose a higher quality abrasive like Aluminum Oxide, for your stripping needs. While it may be more costly up front, it quickly becomes cheaper as you continually use it.  If however, you are sand blasting in a garage where you are unable to recover a bulk of the product, then use something more economical.


In cases where you are outside of a cabinet, but are able to recapture the abrasive on a floor, tarp, or by other means, sweep it up and reuse it. But, before you put it back into your system run it through an old window screen to remove large debris. 


Company information:

Shandong Kaitai Metal Abrasive Co., Ltd. is the biggest manufacturer  and exporter of cast steel shot ,cast steel grit ,stainless steel shot ,stainless steel cut wire shot .copper shot in China.We located in Zouping town,Binzhou, Shandong province, near Jinan airport fast transportation.


The products have exported to more than 80countries and regions and have got good comments from domestic and abroad users of foundry plant, forging plant, heat treatment shop, steel structure plant, container manufacturer, shipyard, auto and locomotive manufacturer and stone industries.



Q: Could you tell me your company payment term?


A: General 100% T/T in advance ,30% T/T in advance ,70% payment against copy of Bill of Loading ,100% L/C at sight


Q: Can you provide free samples?


A: Yes,can forward free samples less than 200gs if possible.


Q: What standards are you carrying out for your products?


A: Our products reach SAE standard. We produce according to the ISO9001 and ISO14001 rules.


Q: To which countries and regions are you exporting?


A: About 80 countries and regions all around the world, such as, the USA, France, Singapore, Australia, Middle East, Brazil, Peru and so on.


Q: What’s your year productivity?


Our yearly productivity: 250000 tons per year.


Contact Us
  • Tel: +86 543 4578 888
  • Tel: +86 543 4288 886
  • Fax: +86 543 4579 617
  • E-mail: becky@kai-tai.com.cn
  • Add: Qingyang, Zouping Town, Shandong Province, China
Inquiry List
Get In Touch

Copyright © SHANDONG KAITAI GROUP CO., LTD. All Rights Reserved
Technical Support:

Cindy
Sunny